Published January 1, 2015 | Version v1
Publication Open

EFEITO DO TEMPO ENTRE DEFORMAÇÕES NA INTERAÇÃO RECRISTALIZAÇÃO: PRECIPITAÇÃO DE UM AÇO INOXIDÁVEL AUSTENÍTICO COM ALTO TEOR DE NIÓBIO E NITROGÊNIO

  • 1. Universidade Federal de São Carlos
  • 2. Universidade Estadual Paulista (Unesp)
  • 3. Universitat Politècnica de Catalunya
  • 4. Fundació CTM Centre Tecnològic

Description

Neste trabalho foi avaliada a influência do tempo entre passes de deformação na interação entre precipitação e recristalização durante o processamento termomecânico do aço ISO 5832-9.A evolução da microestrutura foi investigada por microscopia ótica, eletrônica de transmissão e EBSD.Observou-se que quanto menor o tempo entre passes de deformação, maiores foram as tensões necessárias para promover a deformação e menores os tamanhos dos grãos e precipitados obtidos.Após o encharque, somente precipitados de TiNbN foram encontrados, entretanto NbCrN (fase Ζ) e NbN precipitaram durante o processamento termomecânico.O material sofre recristalização dinâmica e partículas de 50 nm foram efetivas no ancoramento dos contornos de grãos e discordâncias.

⚠️ This is an automatic machine translation with an accuracy of 90-95%

Translated Description (Arabic)

في هذا العمل، تم تقييم تأثير الوقت بين التشوه على التفاعل بين الترسيب وإعادة التبلور أثناء المعالجة الميكانيكية الحرارية للصلب ISO 5832-9. تم التحقيق في تطور البنية المجهرية عن طريق الفحص المجهري البصري وإلكترونيات الإرسال و EBSD. ولوحظ أنه كلما كان الوقت أقصر بين مرور التشوه، زادت الضغوط اللازمة لتعزيز التشوه وأصغر أحجام الحبوب والرواسب التي تم الحصول عليها. بعد النقع، تم العثور على رواسب TiNbN فقط، ولكن NbCrN (المرحلة ؟) و NbN ترسبت أثناء المعالجة الميكانيكية الحرارية. تخضع المادة لإعادة التبلور الديناميكي وكانت جزيئات 50 نانومتر فعالة في تثبيت خطوط الحبوب والخلافات.

Translated Description (English)

In this work, the influence of the time between deformation passes on the interaction between precipitation and recrystallization during the thermomechanical processing of ISO 5832-9 steel was evaluated. The evolution of the microstructure was investigated by optical microscopy, transmission electronics and EBSD.It was observed that the shorter the time between deformation passes, the greater the stresses necessary to promote deformation and the smaller the sizes of the grains and precipitates obtained. After soaking, only precipitates of TiNbN were found, however NbCrN (phase?) and NbN precipitated during thermomechanical processing. The material undergoes dynamic recrystallization and 50 nm particles were effective in anchoring the grain contours and disagreements.

Translated Description (French)

Dans ce travail, l'influence du temps entre les passages de déformation sur l'interaction entre la précipitation et la recristallisation lors du traitement thermomécanique de l'acier ISO 5832-9 a été évaluée. L'évolution de la microstructure a été étudiée par microscopie optique, électronique de transmission et EBSD.Il a été observé que plus le temps entre les passages de déformation est court, plus les contraintes nécessaires pour favoriser la déformation sont importantes et plus les tailles des grains et des précipités obtenus sont petites. Après trempage, seuls des précipités de TiNbN ont été trouvés, cependant NbCrN (phase ?) et NbN précipités lors du traitement thermomécanique. Le matériau subit une recristallisation dynamique et des particules de 50 nm ont été efficaces pour ancrer les contours et les désaccords des grains.

Translated Description (Spanish)

En este trabajo se evaluó la influencia del tiempo entre pases de deformación sobre la interacción entre precipitación y recristalización durante el procesamiento termomecánico del acero ISO 5832-9, se investigó la evolución de la microestructura mediante microscopía óptica, electrónica de transmisión y EBSD. se observó que cuanto menor es el tiempo entre pases de deformación, mayores son los esfuerzos necesarios para promover la deformación y menores son los tamaños de los granos y precipitados obtenidos, luego del remojo solo se encontraron precipitados de TiNbN, sin embargo NbCrN (fase?) y NbN precipitaron durante el procesamiento termomecánico, el material sufre recristalización dinámica y las partículas de 50 nm fueron efectivas en el anclaje de los contornos de grano y desacuerdos.

Files

tmm-12-4-294.pdf.pdf

Files (4.7 MB)

⚠️ Please wait a few minutes before your translated files are ready ⚠️ Note: Some files might be protected thus translations might not work.
Name Size Download all
md5:0ffc5445407124453719171b327ce051
4.7 MB
Preview Download

Additional details

Additional titles

Translated title (Arabic)
تأثير الوقت بين التشوهات على تفاعل إعادة التبلور: ترسيب الفولاذ المقاوم للصدأ الأوستنيتي مع نسبة عالية من النيوبيوم والنيتروجين
Translated title (English)
EFFECT OF TIME BETWEEN DEFORMATIONS ON RECRYSTALLIZATION INTERACTION: PRECIPITATION OF AN AUSTENITIC STAINLESS STEEL WITH HIGH NIOBIUM AND NITROGEN CONTENT
Translated title (French)
EFFET DU TEMPS ENTRE LES DÉFORMATIONS SUR L'INTERACTION DE RECRISTALLISATION : PRÉCIPITATION D'UN ACIER INOXYDABLE AUSTÉNITIQUE À HAUTE TENEUR EN NIOBIUM ET EN AZOTE
Translated title (Spanish)
EFECTO DEL TIEMPO ENTRE DEFORMACIONES EN LA INTERACCIÓN DE RECRISTALIZACIÓN: PRECIPITACIÓN DE UN ACERO INOXIDABLE AUSTENÍTICO CON ALTO CONTENIDO DE NIOBIO Y NITRÓGENO

Identifiers

Other
https://openalex.org/W2185619215
DOI
10.4322/2176-1523.0877

GreSIS Basics Section

Is Global South Knowledge
Yes
Country
Brazil

References

  • https://openalex.org/W2031550068
  • https://openalex.org/W2062350664
  • https://openalex.org/W2253505867