Published February 6, 2024 | Version v1
Publication Open

A Novel Technique for High-Performance Grid Integrated with Restricted Placement of PV-DG considering Load Change

  • 1. Electronics Research Institute

Description

The distributed generation (DG) units' penetrations in power systems are becoming more prevalent. The majority of recent studies are now focusing on how to best position and size PV-DG units to further improve grid performance. In actuality, and as a result of ideal design requirements, the size and position of the PV are chosen and executed, and no luxury for a change. In this work, the PV-DG unit sizing and location were determined and placed beforehand. Also, load change is a fact and is to be highly considered in the grid. Studying the grid performance and how to enhance it under these conditions is the main objective of this study. This examination was executed using an IEEE 15 bus system in a MATLAB environment. Distribution lines were proposed to connect the PV-DG from its restricted location to the required bus. The purpose of this study is therefore to evaluate the grid's performance with various actual loads on each bus while connecting a PV-DG unit through a distribution line while taking the available transfer capacity (ATC) of the network into account to find the optimally connected bus. The results said that the optimally connected bus is changed by changing the load which is not doable on land. The results obtained indicate that breaking up PV-DG units into smaller units in the same location and connecting them to every bus was the best option for improving grid performance.

⚠️ This is an automatic machine translation with an accuracy of 90-95%

Translated Description (Arabic)

أصبحت اختراقات وحدات التوليد الموزع (DG) في أنظمة الطاقة أكثر انتشارًا. تركز غالبية الدراسات الحديثة الآن على أفضل طريقة لوضع وحجم وحدات PV - DG لزيادة تحسين أداء الشبكة. في الواقع، ونتيجة لمتطلبات التصميم المثالية، يتم اختيار حجم وموقع الكهروضوئية وتنفيذها، ولا ترف للتغيير. في هذا العمل، تم تحديد حجم وحدة PV - DG وموقعها ووضعها مسبقًا. كما أن تغيير الحمل حقيقة ويجب مراعاتها بشكل كبير في الشبكة. دراسة أداء الشبكة وكيفية تعزيزها في ظل هذه الظروف هو الهدف الرئيسي من هذه الدراسة. تم إجراء هذا الفحص باستخدام نظام ناقل IEEE 15 في بيئة MATLAB. تم اقتراح خطوط توزيع لتوصيل PV - DG من موقعها المقيد إلى الحافلة المطلوبة. لذلك فإن الغرض من هذه الدراسة هو تقييم أداء الشبكة مع الأحمال الفعلية المختلفة على كل ناقل أثناء توصيل وحدة PV - DG من خلال خط توزيع مع أخذ سعة النقل المتاحة (ATC) للشبكة في الاعتبار للعثور على الناقل المتصل على النحو الأمثل. وقالت النتائج إن الحافلة المتصلة على النحو الأمثل يتم تغييرها عن طريق تغيير الحمل الذي لا يمكن القيام به على الأرض. تشير النتائج التي تم الحصول عليها إلى أن تقسيم وحدات PV - DG إلى وحدات أصغر في نفس الموقع وربطها بكل ناقل كان الخيار الأفضل لتحسين أداء الشبكة.

Translated Description (French)

Les unités de production distribuée (DG) pénètrent de plus en plus dans les systèmes d'alimentation. La majorité des études récentes se concentrent maintenant sur la meilleure façon de positionner et de dimensionner les unités PV-DG pour améliorer davantage les performances du réseau. En réalité, et en raison d'exigences de conception idéales, la taille et la position du PV sont choisies et exécutées, et pas de luxe pour un changement. Dans ce travail, le dimensionnement et l'emplacement de l'unité PV-DG ont été déterminés et placés au préalable. En outre, le changement de charge est un fait et doit être fortement pris en compte dans le réseau. Étudier la performance du réseau et comment l'améliorer dans ces conditions est l'objectif principal de cette étude. Cet examen a été exécuté en utilisant un système de bus IEEE 15 dans un environnement Matlab. Des lignes de distribution ont été proposées pour relier le PV-DG de son emplacement restreint au bus requis. L'objectif de cette étude est donc d'évaluer la performance du réseau avec différentes charges réelles sur chaque bus tout en connectant une unité PV-DG via une ligne de distribution tout en prenant en compte la capacité de transfert disponible (ATC) du réseau pour trouver le bus connecté de manière optimale. Les résultats ont indiqué que le bus connecté de manière optimale est changé en changeant la charge qui n'est pas faisable sur terre. Les résultats obtenus indiquent que diviser les unités PV-DG en unités plus petites au même endroit et les connecter à chaque bus était la meilleure option pour améliorer les performances du réseau.

Translated Description (Spanish)

Las penetraciones de las unidades de generación distribuida (DG) en los sistemas de energía son cada vez más frecuentes. La mayoría de los estudios recientes se centran ahora en cómo posicionar y dimensionar mejor las unidades PV-DG para mejorar aún más el rendimiento de la red. En realidad, y como resultado de los requisitos de diseño ideales, se eligen y ejecutan el tamaño y la posición del PV, y no hay lujo para variar. En este trabajo, el tamaño y la ubicación de la unidad PV-DG se determinaron y colocaron de antemano. Además, el cambio de carga es un hecho y debe ser muy considerado en la red. El objetivo principal de este estudio es estudiar el rendimiento de la red y cómo mejorarlo en estas condiciones. Este examen se ejecutó utilizando un sistema de bus IEEE 15 en un entorno MATLAB. Se propusieron líneas de distribución para conectar el PV-DG desde su ubicación restringida al bus requerido. Por lo tanto, el propósito de este estudio es evaluar el rendimiento de la red con varias cargas reales en cada bus mientras se conecta una unidad PV-DG a través de una línea de distribución, teniendo en cuenta la capacidad de transferencia disponible (ATC) de la red para encontrar el bus conectado de manera óptima. Los resultados indicaron que el bus óptimamente conectado se cambia cambiando la carga, lo que no es factible en tierra. Los resultados obtenidos indican que dividir las unidades PV-DG en unidades más pequeñas en la misma ubicación y conectarlas a cada bus era la mejor opción para mejorar el rendimiento de la red.

Files

5395272.pdf.pdf

Files (15.9 kB)

⚠️ Please wait a few minutes before your translated files are ready ⚠️ Note: Some files might be protected thus translations might not work.
Name Size Download all
md5:6df1c90dbfadad83015bc135cb52b2ba
15.9 kB
Preview Download

Additional details

Additional titles

Translated title (Arabic)
تقنية جديدة لشبكة عالية الأداء متكاملة مع وضع مقيد لـ PV - DG مع مراعاة تغيير الحمل
Translated title (French)
Une nouvelle technique pour une grille haute performance intégrée avec un placement restreint de PV-DG compte tenu du changement de charge
Translated title (Spanish)
Una técnica novedosa para la red de alto rendimiento integrada con la colocación restringida de PV-DG considerando el cambio de carga

Identifiers

Other
https://openalex.org/W4391557466
DOI
10.1155/2024/5395272

GreSIS Basics Section

Is Global South Knowledge
Yes
Country
Egypt

References

  • https://openalex.org/W2231329709
  • https://openalex.org/W2791677061
  • https://openalex.org/W2914481523
  • https://openalex.org/W2938826917
  • https://openalex.org/W3004370268
  • https://openalex.org/W3035319951
  • https://openalex.org/W3036696431
  • https://openalex.org/W3044348269
  • https://openalex.org/W3095694423
  • https://openalex.org/W3112266969
  • https://openalex.org/W3120470390
  • https://openalex.org/W3154512148
  • https://openalex.org/W3169597857
  • https://openalex.org/W3173447732
  • https://openalex.org/W3182476939
  • https://openalex.org/W3197244609
  • https://openalex.org/W3200404194
  • https://openalex.org/W3202710093
  • https://openalex.org/W3210528453
  • https://openalex.org/W4213216192
  • https://openalex.org/W4214654107
  • https://openalex.org/W4220789121
  • https://openalex.org/W4254877422
  • https://openalex.org/W4292616018
  • https://openalex.org/W4309807661
  • https://openalex.org/W4312444635
  • https://openalex.org/W4361214513
  • https://openalex.org/W4389346456